1.07.0812BN/-V Filter elements-HYDAC

"Mainly used to filter hydraulic oil mixed with solid particles produced by normal mechanical wear and particles sucked from it, to ensure the cleanliness of the oil, reduce component loss, and prevent jamming during system operation. This Nantong South Lubrication The filter element of the oil station has a filtration accuracy of 40 microns, which can filter out particulate impurities larger than 40 microns, with a filtration rate of 99.5%.

Application of filter element in lubricating oil station

Cement industry
Power Industry
Steel smelting
Petrochemical
ISO3724 determination of fatigue characteristics of filter elements
Determination of differential pressure and flow rate of ISO3968 filter element
ISO4572 filter element multi-pass method for determination of filtration characteristics

The advantage of ZNGL02011001 is that it is mainly installed on the double-cylinder oil return line filter of the hydraulic system. Various dirt such as abrasive particles generated during the working process of various hydraulic components can be intercepted by setting the oil filter of the oil return line to avoid It returns to the oil tank again and is sucked in by the hydraulic pump again. The allowable pressure difference of the oil filter of the oil return line, according to different pressure levels, ranges from 0.3 to 0.5 MPa. The accuracy is determined according to the requirements of oil pollution degree. In the working process, when the single-cylinder filter element is blocked to a certain degree and needs to be cleaned or replaced, the host must be stopped to replace the filter element. This not only wastes time, but also cannot meet the continuous working needs of the host. The double-cylinder filter effectively solves the problem. The shortcomings of the cartridge filter, the filter element can be cleaned or replaced without stopping the machine to ensure the normal and continuous operation of the host. When a filter element is clogged and needs to be replaced, it is not necessary to stop the main engine. As long as the pressure balance valve is opened and the reversing valve is turned, the other filter can participate in the work, and then replace the clogged filter element. "

1.07.0812BN/-V Filter elements-HYDAC
1.07.08D25BN Filter elements-HYDAC
1.07.08D25BN/-V Filter elements-HYDAC
1.07.04D03BH Filter elements-HYDAC
1.07.04D03BH/-V Filter elements-HYDAC
1.07.04D06BH Filter elements-HYDAC
1.07.04D10BH Filter elements-HYDAC
https://www.amlppindequ.com/filter/2568.html
1.07.04D17BH Filter elements-HYDAC
1.07.04D17BH/-V Filter elements-HYDAC
1.07.08D03BH Filter elements-HYDAC
1.07.08D03BH/-V Filter elements-HYDAC
1.07.08D06BH Filter elements-HYDAC
1.07.08D06BH/-V Filter elements-HYDAC
1.07.08D10BH Filter elements-HYDAC
1.07.08D10BH/-V Filter elements-HYDAC
1.07.08D17BH Filter elements-HYDAC
1.10.13D03BN Filter elements-HYDAC
1.10.13D06BN Filter elements-HYDAC
1.10.13D06BN/-V Filter elements-HYDAC
1.10.13D12BN Filter elements-HYDAC
1.10.13D25BN Filter elements-HYDAC
1.10.26D03BN Filter elements-HYDAC
1.10.26D06BN Filter elements-HYDAC
1.10.26D12BN Filter elements-HYDAC
1.10.26D25BN Filter elements-HYDAC
1.10.39D03BN Filter elements-HYDAC
1.10.39D03BN/-V Filter elements-HYDAC
1.10.39D06BN Filter elements-HYDAC
1.10.39D06BN/-V Filter elements-HYDAC